armco barrier suppliers-manufacture,factory,supplier from China

U post is a kind of steel with a move phase just like the english letter "u".

The ends of the highway corrugated barrier are used to be installed on both ends of the highway corrugated barrier, and have the following main purposes：1. Structural reinforcement: The end of the barrier board can enhance the structural strength and stability of the barrier board, preventing deformation or dumping of the barrier board when it is impacted by external force.2.

Guardrail beams are horizontal structural members used in guardrail construction. Usually made of steel, it is designed to provide a barrier between the vehicle and a potential hazard, such as a cliff, steep slope, or other hazardous area.

TFORST provides high-quality guardrail beam products to the worldWhen the vehicle collides with it, the corrugated steel guardrail has good crashworthiness and energy absorption, so it is not easy to be crashed, and it also plays a good role in protecting the vehicle and the passengers.

FORST guardrail beam product application:The guardrail is the part that plays a protective role. It is made of S235JR or S355JR material. The commonly used shapes are corrugated and steel lattice structures. It has certain flexibility and strength, which can effectively reduce the impact force, reduce vehicle collisions, and reduce the occurrence of traffic accidents.

Quick Details of Guardrail beam Place of OriginShandong, ChinaBrand Name:FORSTProduct nameHaghway Guardrail W BeamMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeature:Impact and corrosion resistantCertificate:ISO9001,AASHTO M180Thickness:2.5mm-4.0mmApplication:Roadway SafetyLength2320-4320mmKeyword:Traffic Road Steel BarrierColor:silver whiteMOQ:100pcsPackaging Details20 pieces a packShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduct parameter of Guardrail beamNormal SizesLength(mm):2000/2320/3200/3810/4000/4320 W:306/310/312/38

The use rate of the post in Africa is very high, and many customers choose this type of post, which has low cost, simple process and convenient installation.Details of Road U Post：Place of OriginShandong, ChinaBrand Name:ForstProduct nameU PostMaterialS235JR S355JRProduct picture of Road U Post： Specification of Steel Guardrail U Post：Normal Sizes150*75*5*1830mm;178*76*6*1830Other specifications can be customizedMaterailS235JR,S355JR Surfacce treatmentHot dipped galvanized or plastic sprayed coatingBase SteelGrade S235JR ( according to DIN EN 10025 and Gr.

FORST guardrail beam hot-dip galvanizing is a commonly used anti-corrosion process,1. Preparatory work: Clean and surface-treat the guardrail to remove oil, rust and other impurities on the surface to ensure the adhesion of the coating.2. Pickling: immerse the guardrail in an acidic solution such as hydrochloric acid or sulfuric acid for pickling. Pickling can remove oxides and rust on the surface and improve the adhesion of the coating.3. Pretreatment: The pickled guardrail is subjected to wet coating pretreatment.

FORST guardrail beam is a special guardrail material produced by China FORST company, which has the following advantages:1. High strength2. Corrosion resistance3. Easy to install4. Abundant sizes and specifications5. Beautiful6.

The material structure of the guardrail beamSteel guardrail: Steel guardrail is the most common material and usually consists of cold-formed steel plates.Usually S235JR and S355JR materials, which have relatively high strength and rigidity, can provide bettercollision protection and safety performance.

The accessories of waveform guardrail mainly include the following:1. Guardrail column: The corrugated guardrail column is the main part of the support guardrail, usually made of square tube or round tube, according to different needs have different heights and sizes to choose from.2. Guardrail beam: Waveform guardrail beam is a component connected to the guardrail column, used to support the guardrail plate, usually made of square pipe, length according to the needs of the guardrail.3.

Lower price: Compared with other building materials, U-post are made of cold-rolled steel and are simple to process, so the price is relatively low and more economicalQuick Details of Road U Post：Place of OriginShandong, ChinaBrand Name:ForstProduct nameU PostMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification150*75*5*1830(mm)178*76*6*1830(mm)Application:Support guardrail beamColorSilver whiteMOQ:100pcsPackaging DetailsBundledShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduct

C-post internal flange zigzag layout, sturdy tensile energy and bending capacity, can efficiently resist sliding, effect and shear, beautify the connection reliability of the complete systemDue to the fact it's miles product of hot rolled metal plate, has the benefit of mild weight, hot dip zinc surface treatment, anti-corrosion.It has top flexibility, scientific and reasonable internal shape, excessive stability.

Power configuration: Diesel water-cooled engineMixing system: vertical paddle mixerPower: 8hpHeating system: high-efficiency energy-saving burner/direct injection stoveStart mode: electric start / hand pull Heating method: liquefied gas heatingPacking size: 1730*1650*1190mm Coating capacity: 300kg*2Weight: 780kg Recommended discharge temperature: 180 degrees--220 degreesMelt temperature: 0--300 degreesProduct picture of 300kg single cylinder hot melt kettle：

Quick Details of Hot melt kettleModel:SW-4A-1200 Size:1800*1700*1580mm Weight:1020kgs  Tank Quantity:Double Tanks Capacity of Tank:600kgs*2 Hydraulic Oil Tank:70L Material Temperature:180-220℃ Rotational System:20-100r/min Working Pressure:4-5 mpa Diesel Engine:15P Electric started water coolingProduct picture of Hot melt kettle： 

H-post is a brand new form of monetary constructing steel. the segment form of h beam is finances pleasant and reasonable, and the mechanical houses are genuine. at the same time as rolling, every factor on the phase extends greater lightly and the internal stress is small. in evaluation with ordinary i-beam, it has the advantages of big phase modulus, mild weight and metallic saving.

H-post is a new type of economic building steel. The section shape of H beam is economical and reasonable, and the mechanical properties are good. When rolling, each point on the section extends more evenly and the internal stress is small. Compared with ordinary I-beam, it has the advantages of large section modulus, light weight and metal saving.

H post production material is generally low carbon steel or low alloy steel. Commonly used Q235B, Q355B, SS400 and other materials. These materials have good mechanical properties and cost-effective, widely used in construction, bridge, steel structure and other fields. In processing and manufacturing, it is also necessary to carry out hot rolling, cold rolling or hot galvanizing and other treatments to improve its strength, corrosion resistance and beauty.

Hot-dip galvanizing can improve the anti-corrosion property of H-beam column, so that it can be widely used in the area with serious environmental pollution or humidity.

Guardrail zinc layer treatment methods usually include the following:1. Hot dip galvanizing: the guardrail components are first de-oiled and de-rusted, and then immersed in the molten zinc liquid to form a uniform and dense zinc layer on the surface of the components through a chemical reaction.2. Electric galvanizing: The guardrail parts are galvanized by electrolysis, that is, zinc sheets are placed on the surface of the parts as an anode, and zinc ions are deposited on the surface of the parts to form a zinc layer through the action of current.3.

C post inner flange zigzag format, robust tensile strength and bending ability, can efficiently withstand sliding, impact and shear, decorate the connection reliability of the whole deviceDue to the truth it's far crafted from heat rolled metal plate, has the gain of mild weight, hot dip zinc ground treatment, anti-corrosion.It has pinnacle flexibility, medical and affordable internal form, immoderate balance.

C post inner flange zigzag format, robust tensile strength and bending capacity, can successfully face up to sliding, impact and shear, beautify the connection reliability of the complete gadgetBecause of the reality it's miles made from warm rolled metal plate, has the advantage of mild weight, hot dip zinc floor treatment, anti-corrosion.It has pinnacle flexibility, scientific and reasonable internal form, immoderate balance.

The wave guardrail bullnose end is a specially shaped end that is often used at both ends of the wave guardrail system. It usually has the following characteristics:1. Bull-nose shape: The shape of the bull-nose end of the corrugated guardrail presents a design similar to a bull-nose, that is, the middle protrudes and the two sides narrow. This special shape helps to reduce the impact force in the event of a collision, improving safety.2.

Quick Details of Terminal End：Place of OriginShandong, ChinaBrand Name:ForstProduct nameFish TailMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification725*310*2.75(mm)Application:Installed at the rear of the guardrail beamColorsilver whiteMOQ:100pcsPackaging DetailsBundledShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduct picture of Terminal End：Specification of Terminal End：Normal Sizes725*310*2.75(mm)Other specifications can be customizedMaterailS235JR,S355JR Surfacce treatmen