C Posts-manufacture,factory,supplier from China

Guardrail Beam C Posts Specifications:Normal Sizes1830*120*62.5*25   Thickness :4-6mmDifferent sizes can be customized.Raw Material Q235B/Q355B (equivalent to S235JR/S355JR)Surface TreatmentHot dipped galvanized or powder/plastic sprayed coatingThe Thickness of Galvanized(Double Sides):550 g/m2 (1.80 oz/ft2 ) minimum single-spot.1100 g/m2 (3.60 oz/ft2 ) minimum single-spot.Or as per your 

The method of installing C-shaped columns is as follows:1. Preparation: Confirm the installation position and quantity, and measure the appropriate size. Prepare required tools and materials, such as electric drills, screwdrivers, screws, nuts, and wrenches.2. Install support: Secure the column support to the ground or wall, and secure the support using screws and nuts. Ensure the position and levelness of the support.3.

C post inner flange zigzag format, robust tensile strength and bending ability, can efficiently withstand sliding, impact and shear, decorate the connection reliability of the whole deviceIt has pinnacle flexibility, medical and affordable internal form, immoderate balance.

C post inner flange zigzag layout, robust tensile strength and bending potential, can efficiently withstand sliding, effect and shear, decorate the connection reliability of the complete gadgetDue to the reality it's miles made from warm rolled steel plate, has the gain of slight weight, hot dip zinc floor treatment, anti-corrosion.It has pinnacle flexibility, medical and reasonable internal form, excessive balance.

It has pinnacle flexibility, medical and affordable internal form, immoderate balance. commonly may be used to virtually acquire large oscillations, resistance to herbal disasters within reason sturdy.The production process of the C postMaterial selection: Cut the raw material slats, use the bending machine to form, a total of 4 times bending moldingGalvanized C-post refers to the use of steel plate new section steel, cold-rolled bending molding, uniform wall thickness, cross-section.

C post inner flange zigzag format, robust tensile strength and bending capacity, can successfully face up to sliding, impact and shear, beautify the connection reliability of the complete gadgetBecause of the reality it's miles made from warm rolled metal plate, has the advantage of mild weight, hot dip zinc floor treatment, anti-corrosion.It has pinnacle flexibility, scientific and reasonable internal form, immoderate balance.

The galvanizing method of C post can generally be carried out by the following steps:1. Material procurement: First of all, we must choose the appropriate C post material, usually choose galvanized steel or galvanized steel. 2. Prepare the surface: Before galvanizing, ensure that the surface of the C post is smooth and free of impurities or dirt. Tools such as brushes or sandpaper can be used to clean and sand the surface of the post. 3.

C-post internal flange zigzag layout, sturdy tensile energy and bending capacity, can efficiently resist sliding, effect and shear, beautify the connection reliability of the complete systemDue to the fact it's miles product of hot rolled metal plate, has the benefit of mild weight, hot dip zinc surface treatment, anti-corrosion.It has top flexibility, scientific and reasonable internal shape, excessive stability.

C post inner flange zigzag format, robust tensile strength and bending ability, can efficiently withstand sliding, impact and shear, decorate the connection reliability of the whole deviceDue to the truth it's far crafted from heat rolled metal plate, has the gain of mild weight, hot dip zinc ground treatment, anti-corrosion.It has pinnacle flexibility, medical and affordable internal form, immoderate balance.

Quick Details of Guardrail Beam C postPlace of OriginShandong, ChinaBrand Name:FORSTProduct nameC PostMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification149*110*19*4.3*1830(mm)120*68*20*5*1500(mm)100*50*25*5*1500(mm)Application:Support guardrail beamColorsilver whiteMOQ:100pcsPackaging DetailsBundledShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per Year Product picture of Guardrail Beam C post Specification of Guardrail Beam C post：Normal Sizes149*110*19*4.

C-post inner flange zigzag design, strong tensile strength and bending ability, can effectively resist sliding, impact and shear, enhance the connection reliability of the whole systemBecause it is made of hot rolled steel plate, has the advantage of light weight, hot dip zinc surface treatment, anti-corrosion.It has good flexibility, scientific and reasonable internal structure, high stability.

Quick Details of  Guardrail Beam C Post：Place of OriginShandong, ChinaBrand Name:ForstProduct nameC PostMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification149*110*19*4.3*1830(mm)120*68*20*5*1500(mm)100*50*25*5*1500(mm)The benefits of C-columnLoad sharing: The column can transfer the load of the building or other structure to the foundation, and disperse the load through the foundation to reduce the pressure of the foundation and protect the stability of the foundation.Increase aesthetics: Columns can b

FORST AASHTO M180 H post refers to the H-shaped posts used in the AASHTO M180 standard for highway guardrails. Here are some specifications and features of the AASHTO M180 H post:1. Material: Typically made of galvanized steel for corrosion resistance and durability.2. Height: Common heights range from 1.83 meters to 1.5 meters, but custom heights can also be accommodated.3. Shape: H-shaped cross-section, with a horizontal beam on top and vertical posts below.4. Gauge: The thickness of the post can vary depending on design requirements, typically ranging from 3mm to 5mm.5.

Quick Details of Fish Tail-C：The fishtail terminal is a fan type end which provides a shallow termination for a steel guardrail fences.  It is flared away from the roadway to cushion the shock.  Place of OriginShandong, ChinaBrand Name:ForstProduct nameFish TailMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification725*310*2.75(mm)Application:Installed at the rear of the guardrail beamColorsilver whiteMOQ:100pcsPackaging DetailsBundledShipping portQingdao Tianjin or otherSupply Ability15000 Ton/

Product picture of Reflector：   Quick Details of ReflectorPlace of Origin:Shandong, ChinaBrand Name:ForstMaterial:Plastic/ Steel /AlumminumShape:Rectangular,Round ,sheet, ColumnColor:Yellow/Red;Yellow/Yellow;Red/Red;Yellow/White；Red/WhiteReflect model:PMMA reflectiveWorking Temperature:-25 °C- + 75 °CCertificate:ISOApplication:tunnels, bridges, winding road, roadside,Advantage:Quick and easy to installSupply AbilitySupply Ability：7000 Piece/Pieces per DayPackaging & Delivery of ReflectorPackaging Details Export standard packaging or as your requestPort：Tianjin

The material of the column is usually steel, specifically ordinary carbon structural steel or high-strength structural steel. Common materials include Q235B, S235JR, Q355B, S355JR, SS400 and so on.Q235B is a commonly used carbon structural steel, its chemical composition mainly contains carbon (C), silicon (Si), manganese (Mn), sulfur (S), phosphorus (P) and other elements. It has good plasticity and weldability, and is widely used in architectural and structural engineering.Q345B is a high-strength structural steel with higher yield strength and tensile strength compared to Q235B.

The importance of installing highway guardrail beams1. Safety protection: The main function of highway guardrail beams is to protect vehicles and pedestrians on both sides of the roadway from traffic accidents. It can play a role in restricting vehicles from leaving the road and preventing collisions with obstacles, thereby reducing the possibility of collision accidents and ensuring the safety of drivers and pedestrians.2. Traffic guidance: Guardrail beams can also be used to guide the direction of vehicles, helping vehicles to maintain normal and orderly driving on the highway.3.

Highway Guardrail Pile Driver（Pile driver、Pile puller、driller）Parameter NameUnitParameterParameter NameUnitParameterEngine rated powerKwA 33KW,A 51KW  Engine BrandA China FAW XichaiA Weichai EngineMachine Size（In Working）mm3250×2000×3400    (Column height after folding2400）Impact Frequency of Hydraulic Hammer次/min500-900Piling HeightMeter2.7Hydraulic Hammer Working Flowml/r30-50Machine Weightkg3200Hydraulic Hammer Working PressureMpa12~16Hydraulic System Working PressureMPa16Air FlowM3/min8Hydraulic System Flowml/r50Working Air PressureMPa0.5-1Drilling DiametermmØ

The bending of the guardrail on the expressway will increase the aesthetics and the strength of the guardrail; It is formed by extrusion of automatic production line, with clean surface and strong corrosion resistance; Mature surface treatment; Anti-corrosion, anti-aging, sun resistance, high and low temperature resistance and other characteristics, the service life in outdoor environment can reach 10-25 years; The product is simple in structure, beautiful and practical, convenient for transportation and installation, good in anti-theft performance, and limited by the actual terrain.

Guardrail inventory methods generally include the following aspects:1. Inventory management: Establish a reasonable guardrail inventory management system, including a clear record of guardrail purchase, shipment and inventory. You can use spreadsheets or professional inventory management software to manage and ensure the accuracy of inventory data.2. Regular inventory: regular inventory of guardrail inventory to confirm whether the quantity and quality of inventory are consistent with the record.

The galvanizing process of guardrail usually includes the following steps:1. Surface treatment: First of all, the guardrail needs to be treated on the surface, such as removing oil, rust, dirt and so on. This can be achieved through chemical cleaning, sandblasting, rust remover and other methods to ensure the adhesion and uniformity of the coating.2. Pickling: The guardrail is immersed in an acid bath, and after a period of pickling treatment, to remove deeper oxides and impurities, while providing a clean surface for subsequent galvanizing.3.

FORST guardrail beams have the following characteristics:1. High strength: FORST guardrail beams are made of high-strength materials, which have excellent structural strength and durability, can withstand large pressure and impact, and ensure the stability and safety of the guardrail system.2. Precise manufacturing: FORST guardrail beam adopts advanced production equipment and technology, pays attention to details and precision control, ensures product quality and dimensional accuracy, and provides reliable guardrail system.3.

Advantages of FORST guardrail beams:1. Safety performance: Guardrail beams are usually used in fences and safety protection systems, which can provide effective physical isolation and protection. Its solid structure and height can prevent people or vehicles from accidentally passing through, ensuring safety.2. Durability: Guardrail beams are generally treated with hot-dip galvanizing or other anti-corrosion processes, which can effectively prevent rust and corrosion. The guardrail has a long service life, can withstand the test of various harsh environments, and is not easy to be damaged.3.

Usual packaging of FORST guardrail beams:1. Prepare packing materials: isolation rope, iron packing belt2. Guardrail beams are stacked crosswise every 20 or 30 pieces, and isolation ropes are placed in the middle of each layer3. The purpose of the isolation rope is to avoid wear between the guardrail beams and to maintain ventilation between each package of guardrail beams4. Wrap up with iron straps5.