ccc-manufacture,factory,supplier from China

The processing process of H-post is usually as follows:1. Steel procurement: First of all, we need to purchase H-post materials of corresponding specifications, and pay attention to selecting manufacturers and materials with good quality.2. Blanking: According to the design requirements, use a sawing machine or flame cutting machine to cut the H-beam steel material to the required length and Angle.3. Chamfering: For the sharp corners of H-post, chamfering machine should be used to remove the angles to prevent injury.4. Welding: Welding the cut H-beam column.

H-beam post has the following advantages:1. High strength: The section shape of H-post is reasonable, able to withstand complex mechanical forces, with high strength.2. Good stability: The upper and lower flange pressure bar and the groove of the middle waist bar of the H-section steel column can make the stability of the structure better, and enhance the bending, torsion and extrusion resistance.3. Strong anti-corrosion: After hot dip galvanizing, H-beam post has good anti-corrosion and anti-oxidation effect to protect the long-term service life of steel structure.4.

Steel H post has the following advantages:1. High strength: The section shape of H post is reasonable, able to withstand complex mechanical forces, with high strength.2. Good stability: The upper and lower flange pressure bar and the groove of the middle waist bar of the H-section steel column can make the stability of the structure better, and enhance the bending, torsion and extrusion resistance.3. Strong anti-corrosion: After hot dip galvanizing, H-beam post has good anti-corrosion and anti-oxidation effect to protect the long-term service life of steel structure.4.

The general length of the ASTM Steel H post is 1830mm, 1500mm, and 1750mm. Holes are drilled on both sides of the H postASTM Steel H Post picture  Specification of ASTM Steel H Post:Normal Sizes150*100*4.3*5.5*1830(mm)100*50*25*5*1500(mm)Other specifications can be customizedMaterailS235JR,S355JR Surfacce treatmentHot dipped galvanized or plastic sprayed coatingBase SteelGrade S235JR ( according to DIN EN 10025 and Gr.

H post production material is generally low carbon steel or low alloy steel. Commonly used Q235B, Q355B, SS400 and other materials. These materials have good mechanical properties and cost-effective, widely used in construction, bridge, steel structure and other fields. In processing and manufacturing, it is also necessary to carry out hot rolling, cold rolling or hot galvanizing and other treatments to improve its strength, corrosion resistance and beauty.

FORST guardrail beam H post has the advantages of high structural strength, easy installation, good corrosion resistance, diverse specifications and beautiful appearance, which can provide stable support and reliable protection for the guardrail system, and can also meet the needs of different environments and architectural styles.FORST guardrail beam H post parametersPlace of OriginShandong, ChinaBrand Name:FORSTProduct nameH PostMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification(Hot Rolled)150*100*4.3*5.

The packaging method of H post can be flexibly adjusted according to the specific situation, and the common packaging methods include the following:1. Film packaging: The H post is packed with transparent film to prevent slight damage and contamination. This packing method is suitable for indoor transportation or short distance handling.2. Pallet packaging: Place multiple HPosts neatly on the pallet and use steel tape or stretch film to fix them.

The galvanizing process of FORST guardrail beam H post can usually be carried out using the following steps:1. Pretreatment: Clean the post surface to remove any dirt, oxides or grease. This can be achieved by methods such as solvent cleaning, sandblasting or pickling.2. Pickling: Soak the post in an acidic solution, such as hydrochloric acid, to remove any further oxides or scale. Pickling can provide a better bonding surface.3. Cleaning: Rinse the post with clean water to remove pickling residues.4. Ventilated and dry: Place the post in a ventilated area to allow it to dry thoroughly.5.

Quick Details of Guardrail Sigma Post：Place of OriginShandong, ChinaBrand Name:ForstProduct nameSigma PostMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification100*55*16*4*1950(mm)Application:Support guardrail beamColorSilver whiteMOQ:100pcsPackaging DetailsBundledShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduct picture of Guardrail Sigma Post：   Specification of Guardrail Sigma Post：Normal Sizes100*55*16*4*1950(mm)Other specifications can be customizedMate

The working principle of the high-speed guardrail pile driver is actually very convenient and simple, the impact force of the pile driver will be injected into the stratum as the main driving force, the consumption of diesel as the power of the pile driver, the use of hydraulic sensing to drive the mechanical work, this construction method has more good efficiency, accurate quality of drilling, and the characteristics of small fuel consumption; For different environments and local geological conditions, we can choose different drill bits to punch in, which can better improve efficiencyHighway

Quick Details of Fish Tail-B：The fishtail terminal is a fan type end which provides a shallow termination for a steel guardrail fences. It is flared away from the roadway to cushion the shock. The fishtail terminal is available for guardrail beams and is ideal for double rail and walkways.

The waveform guardrail buffer end has the following characteristics:1. Buffer design: The buffer end of the wave guardrail adopts special buffer material and structural design, which has good energy absorption capacity, and can absorb and disperse the impact force when the vehicle collides, thereby reducing the damage to the vehicle and driver.2. Strong and durable: The buffer end of the wave guardrail is usually made of high-strength steel or other durable materials, which have sufficient strength and durability to withstand the force of high-speed collisions and remain stable and intact.3.

Quick Details of Terminal End：Place of OriginShandong, ChinaBrand Name:ForstProduct nameFish TailMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification725*310*2.75(mm)Application:Installed at the rear of the guardrail beamColorsilver whiteMOQ:100pcsPackaging DetailsBundledShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduct picture of Terminal End：Specification of Terminal End：Normal Sizes725*310*2.75(mm)Other specifications can be customizedMaterailS235JR,S355JR Surfacce treatmen

Guardrail pile driver instructions1. Before starting the diesel engine, check whether the mechanical system and hydraulic system, water level of the water tank and the oil level of the diesel engine are normal. After 3 minutes of low-speed no-load operation, you can start to work in 5 minutes.2, the machine chassis is driven by hydraulic motor, hydraulic stepless speed regulation. By adjusting the diesel engine speed and fuel supply (manual valve control), different stroke speeds can be obtained.

The method of installing C-shaped columns is as follows:1. Preparation: Confirm the installation position and quantity, and measure the appropriate size. Prepare required tools and materials, such as electric drills, screwdrivers, screws, nuts, and wrenches.2. Install support: Secure the column support to the ground or wall, and secure the support using screws and nuts. Ensure the position and levelness of the support.3.

The material of the column is usually steel, specifically ordinary carbon structural steel or high-strength structural steel. Common materials include Q235B, S235JR, Q355B, S355JR, SS400 and so on.Q235B is a commonly used carbon structural steel, its chemical composition mainly contains carbon (C), silicon (Si), manganese (Mn), sulfur (S), phosphorus (P) and other elements. It has good plasticity and weldability, and is widely used in architectural and structural engineering.Q345B is a high-strength structural steel with higher yield strength and tensile strength compared to Q235B.

U-post is a sort of steel with a cross section like the english letter "u".

Quick Details of Fish Tail-A：Place of OriginShandong, ChinaBrand Name:ForstProduct nameFish TailMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification725*310*2.75(mm)Application:Installed at the rear of the guardrail beamColorsilver whiteMOQ:100pcsPackaging DetailsBundledShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduct picture of Fish Tail-A：Specification of Fish Tail-A：Normal Sizes700*310*2.75(mm)Other specifications can be customizedMaterailS235JR,S355JR Surfacce treatmentHo

Power configuration: Diesel water-cooled engineMixing system: vertical paddle mixerPower: 8hpHeating system: high-efficiency energy-saving burner/direct injection stoveStart mode: electric start / hand pull Heating method: liquefied gas heatingPacking size: 1730*1650*1190mm Coating capacity: 300kg*2Weight: 780kg Recommended discharge temperature: 180 degrees--220 degreesMelt temperature: 0--300 degreesProduct picture of 300kg single cylinder hot melt kettle：

Quick Details of Hot melt kettleModel:SW-4A-1200 Size:1800*1700*1580mm Weight:1020kgs  Tank Quantity:Double Tanks Capacity of Tank:600kgs*2 Hydraulic Oil Tank:70L Material Temperature:180-220℃ Rotational System:20-100r/min Working Pressure:4-5 mpa Diesel Engine:15P Electric started water coolingProduct picture of Hot melt kettle： 

The principles of bridge guardrail design mainly include the following aspects1. Strength and stability: Bridge guardrails need to have sufficient strength and stability to withstand the impact of vehicles and the pressure of pedestrians. Generally speaking, the material selection of the guardrail should take into account its durability and corrosion resistance, such as using strong and durable materials such as steel or cast iron.2. Fall protection: The primary function of bridge guardrails is to prevent vehicles and pedestrians from accidentally falling onto bridges.

The wave guardrail bullnose end is a specially shaped end that is often used at both ends of the wave guardrail system. It usually has the following characteristics:1. Bull-nose shape: The shape of the bull-nose end of the corrugated guardrail presents a design similar to a bull-nose, that is, the middle protrudes and the two sides narrow. This special shape helps to reduce the impact force in the event of a collision, improving safety.2.