Gasket-manufacture,factory,supplier from China

Quick Details of Terminal End：Place of OriginShandong, ChinaBrand Name:ForstProduct nameFish TailMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification725*310*2.75(mm)Application:Installed at the rear of the guardrail beamColorsilver whiteMOQ:100pcsPackaging DetailsBundledShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduct picture of Terminal End：Specification of Terminal End：Normal Sizes725*310*2.75(mm)Other specifications can be customizedMaterailS235JR,S355JR Surfacce treatmen

The wave guardrail bullnose end is a specially shaped end that is often used at both ends of the wave guardrail system. It usually has the following characteristics:1. Bull-nose shape: The shape of the bull-nose end of the corrugated guardrail presents a design similar to a bull-nose, that is, the middle protrudes and the two sides narrow. This special shape helps to reduce the impact force in the event of a collision, improving safety.2.

Quick Details of Hot melt kettleModel:SW-4A-1200 Size:1800*1700*1580mm Weight:1020kgs  Tank Quantity:Double Tanks Capacity of Tank:600kgs*2 Hydraulic Oil Tank:70L Material Temperature:180-220℃ Rotational System:20-100r/min Working Pressure:4-5 mpa Diesel Engine:15P Electric started water coolingProduct picture of Hot melt kettle： 

Power configuration: Diesel water-cooled engineMixing system: vertical paddle mixerPower: 8hpHeating system: high-efficiency energy-saving burner/direct injection stoveStart mode: electric start / hand pull Heating method: liquefied gas heatingPacking size: 1730*1650*1190mm Coating capacity: 300kg*2Weight: 780kg Recommended discharge temperature: 180 degrees--220 degreesMelt temperature: 0--300 degreesProduct picture of 300kg single cylinder hot melt kettle：

The working principle of the high-speed guardrail pile driver is actually very convenient and simple, the impact force of the pile driver will be injected into the stratum as the main driving force, the consumption of diesel as the power of the pile driver, the use of hydraulic sensing to drive the mechanical work, this construction method has more good efficiency, accurate quality of drilling, and the characteristics of small fuel consumption; For different environments and local geological conditions, we can choose different drill bits to punch in, which can better improve efficiencyHighway

Guardrail pile driver instructions1. Before starting the diesel engine, check whether the mechanical system and hydraulic system, water level of the water tank and the oil level of the diesel engine are normal. After 3 minutes of low-speed no-load operation, you can start to work in 5 minutes.2, the machine chassis is driven by hydraulic motor, hydraulic stepless speed regulation. By adjusting the diesel engine speed and fuel supply (manual valve control), different stroke speeds can be obtained.

Thermoplastic road marking machine is the key equipment used in thermoplastic road marking construction,it need to work together with thermoplastic preheater.  The marking shoe is made of high-precision cast iron,which can make the road line orderliness,uniform thickness and more beautiful. The grounded knife of marking shoe can adapt to different kinds of road.The glass beads dispenser can dispense glass beads automatically. The paint tank has double layer of stainless steel,which can keep warm and insulate against heat, it can help save energy and avoid form scalding

Quick Details of AASHTO M180 W BeamPlace of OriginShandong, ChinaBrand Name:FORSTProduct nameHaghway GuardrailMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeature:Impact and corrosion resistantCertificate:ISO9001,AASHTO M180,EN1317Thickness:2.5mm-4.0mmApplication:Roadway SafetyLength2320-4320mmKeyword:Traffic Road Steel BarrierColor:silver whiteMOQ:100pcsPackaging Details20 pieces a packShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduct ready to ship Product parameter of AASHTO M180 W BeamNormal SizesLength(mm):2000/2320/3200/38

Quick Details of Guardrail Sigma Post：Place of OriginShandong, ChinaBrand Name:ForstProduct nameSigma PostMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification100*55*16*4*1950(mm)Application:Support guardrail beamColorSilver whiteMOQ:100pcsPackaging DetailsBundledShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduct picture of Guardrail Sigma Post：   Specification of Guardrail Sigma Post：Normal Sizes100*55*16*4*1950(mm)Other specifications can be customizedMate

Quick Details of Steel W BeamPlace of OriginShandong, ChinaBrand Name:FORSTProduct nameHaghway Guardrail W BeamMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeature:Impact and corrosion resistantCertificate:ISO9001,AASHTO M180Thickness:2.5mm-4.0mmApplication:Roadway SafetyLength4130mm,4320mmKeyword:Traffic Road Steel BarrierColor:silver whiteMOQ:100pcsPackaging Details20 pieces a packShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduction flow chart of Steel W BeamProduct parameter of Steel W BeamNormal SizesLength(mm):2000/2320/32

The principles of bridge guardrail design mainly include the following aspects1. Strength and stability: Bridge guardrails need to have sufficient strength and stability to withstand the impact of vehicles and the pressure of pedestrians. Generally speaking, the material selection of the guardrail should take into account its durability and corrosion resistance, such as using strong and durable materials such as steel or cast iron.2. Fall protection: The primary function of bridge guardrails is to prevent vehicles and pedestrians from accidentally falling onto bridges.

The waveform guardrail buffer end has the following characteristics:1. Buffer design: The buffer end of the wave guardrail adopts special buffer material and structural design, which has good energy absorption capacity, and can absorb and disperse the impact force when the vehicle collides, thereby reducing the damage to the vehicle and driver.2. Strong and durable: The buffer end of the wave guardrail is usually made of high-strength steel or other durable materials, which have sufficient strength and durability to withstand the force of high-speed collisions and remain stable and intact.3.

Quick Details of Road traffic guardrailPlace of OriginShandong, ChinaBrand Name:FORSTProduct nameHaghway Guardrail W BeamMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeature:Impact and corrosion resistantCertificate:ISO9001,AASHTO M180Thickness:2.5mm-4.0mmApplication:Roadway SafetyLength2320-4320mmKeyword:Traffic Road Steel BarrierColor:silver whiteMOQ:100pcsPackaging Details20 pieces a packShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduction flow chart of Road traffic guardrailProduct parameter of Road traffic guardrailNormal

Quick Details of Fish Tail-A：Place of OriginShandong, ChinaBrand Name:ForstProduct nameFish TailMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification725*310*2.75(mm)Application:Installed at the rear of the guardrail beamColorsilver whiteMOQ:100pcsPackaging DetailsBundledShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduct picture of Fish Tail-A：Specification of Fish Tail-A：Normal Sizes700*310*2.75(mm)Other specifications can be customizedMaterailS235JR,S355JR Surfacce treatmentHo

Quick Details of Fish Tail-C：The fishtail terminal is a fan type end which provides a shallow termination for a steel guardrail fences.  It is flared away from the roadway to cushion the shock.  Place of OriginShandong, ChinaBrand Name:ForstProduct nameFish TailMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification725*310*2.75(mm)Application:Installed at the rear of the guardrail beamColorsilver whiteMOQ:100pcsPackaging DetailsBundledShipping portQingdao Tianjin or otherSupply Ability15000 Ton/

The method of installing C-shaped columns is as follows:1. Preparation: Confirm the installation position and quantity, and measure the appropriate size. Prepare required tools and materials, such as electric drills, screwdrivers, screws, nuts, and wrenches.2. Install support: Secure the column support to the ground or wall, and secure the support using screws and nuts. Ensure the position and levelness of the support.3.

C-post internal flange zigzag layout, sturdy tensile energy and bending capacity, can efficiently resist sliding, effect and shear, beautify the connection reliability of the complete systemDue to the fact it's miles product of hot rolled metal plate, has the benefit of mild weight, hot dip zinc surface treatment, anti-corrosion.It has top flexibility, scientific and reasonable internal shape, excessive stability.

C post inner flange zigzag format, robust tensile strength and bending ability, can efficiently withstand sliding, impact and shear, decorate the connection reliability of the whole deviceDue to the truth it's far crafted from heat rolled metal plate, has the gain of mild weight, hot dip zinc ground treatment, anti-corrosion.It has pinnacle flexibility, medical and affordable internal form, immoderate balance.

Product picture of Reflector：   Quick Details of ReflectorPlace of Origin:Shandong, ChinaBrand Name:ForstMaterial:Plastic/ Steel /AlumminumShape:Rectangular,Round ,sheet, ColumnColor:Yellow/Red;Yellow/Yellow;Red/Red;Yellow/White；Red/WhiteReflect model:PMMA reflectiveWorking Temperature:-25 °C- + 75 °CCertificate:ISOApplication:tunnels, bridges, winding road, roadside,Advantage:Quick and easy to installSupply AbilitySupply Ability：7000 Piece/Pieces per DayPackaging & Delivery of ReflectorPackaging Details Export standard packaging or as your requestPort：Tianjin

The material of the column is usually steel, specifically ordinary carbon structural steel or high-strength structural steel. Common materials include Q235B, S235JR, Q355B, S355JR, SS400 and so on.Q235B is a commonly used carbon structural steel, its chemical composition mainly contains carbon (C), silicon (Si), manganese (Mn), sulfur (S), phosphorus (P) and other elements. It has good plasticity and weldability, and is widely used in architectural and structural engineering.Q345B is a high-strength structural steel with higher yield strength and tensile strength compared to Q235B.

Quick Details of Road Sigma Post：Place of OriginShandong, ChinaBrand Name:ForstProduct nameSigma PostMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification100*55*16*4*1950(mm)Application:Support guardrail beamColorSilver whiteMOQ:100pcsPackaging DetailsBundledShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduct picture of Road Sigma Post：Specification of Road Sigma Post：Normal Sizes100*55*16*4*1950(mm)Other specifications can be customizedMaterailS235JR,S355JR Surfa

The steerable road guardrail crash pad is a device used to protect road guardrails and vehicles. The following are its main functions and features:1. Protective function: The guideable road guardrail crash pad is designed to reduce the collision impact between the vehicle and the road guardrail. It can cushion the force of collisions and reduce damage to vehicles and guardrails.2. Guidance function: The crash pad usually has a unique shape design, which can guide the vehicle in the collision to a controlled direction, so that the vehicle can avoid a more serious collision.