GS4 post-manufacture,factory,supplier from China

U-post is a kind of metallic with a glide segment just like the english letter "u".

U post is a type of steel with a cross segment like the english letter "u".

C post inner flange zigzag format, robust tensile strength and bending ability, can efficiently withstand sliding, impact and shear, decorate the connection reliability of the whole deviceIt has pinnacle flexibility, medical and affordable internal form, immoderate balance.

Quick Details of Sigma Post：Place of OriginShandong, ChinaBrand Name:ForstProduct nameSigma PostMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification100*55*16*4*1950(mm)Application:Support guardrail beamColorSilver whiteMOQ:100pcsPackaging DetailsBundledShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduct picture of Sigma Post：   Specification of Sigma Post：Normal Sizes100*55*16*4*1950(mm)Other specifications can be customizedMaterailS235JR,S355JR Surfacce treatmentHot

C post inner flange zigzag layout, robust tensile strength and bending potential, can efficiently withstand sliding, effect and shear, decorate the connection reliability of the complete gadgetDue to the reality it's miles made from warm rolled steel plate, has the gain of slight weight, hot dip zinc floor treatment, anti-corrosion.It has pinnacle flexibility, medical and reasonable internal form, excessive balance.

U post is a kind of steel with a flow phase just like the english letter "u".

The processing process of H-post is usually as follows:1. Steel procurement: First of all, we need to purchase H-post materials of corresponding specifications, and pay attention to selecting manufacturers and materials with good quality.2. Blanking: According to the design requirements, use a sawing machine or flame cutting machine to cut the H-beam steel material to the required length and Angle.3. Chamfering: For the sharp corners of H-post, chamfering machine should be used to remove the angles to prevent injury.4. Welding: Welding the cut H-beam column.

The galvanizing method of C post can generally be carried out by the following steps:1. Material procurement: First of all, we must choose the appropriate C post material, usually choose galvanized steel or galvanized steel. 2. Prepare the surface: Before galvanizing, ensure that the surface of the C post is smooth and free of impurities or dirt. Tools such as brushes or sandpaper can be used to clean and sand the surface of the post. 3.

U-post is a kind of steel with a cross section like the English letter "U".

Quick Details of ASTM Steel H PostPlace of OriginShandong, ChinaBrand Name:ForstProduct nameH PostMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification(Hot Rolled)150*100*4.3*5.5*1830(mm)100*50*25*5*1500(mm)The general length of the ASTM Steel H post is 1830mm, 1500mm, and 1750mm. Holes are drilled on both sides of the H post. When installing H-type guardrail post (H post), the following matters need to be noted:1.

C post inner flange zigzag format, robust tensile strength and bending capacity, can successfully face up to sliding, impact and shear, beautify the connection reliability of the complete gadgetBecause of the reality it's miles made from warm rolled metal plate, has the advantage of mild weight, hot dip zinc floor treatment, anti-corrosion.It has pinnacle flexibility, scientific and reasonable internal form, immoderate balance.

H post production material is generally low carbon steel or low alloy steel. Commonly used Q235B, Q355B, SS400 and other materials. These materials have good mechanical properties and cost-effective, widely used in construction, bridge, steel structure and other fields. In processing and manufacturing, it is also necessary to carry out hot rolling, cold rolling or hot galvanizing and other treatments to improve its strength, corrosion resistance and beauty.

U post is a kind of steel with a move phase just like the english letter "u".

Steel H PostThe general length of the ASTM Steel H post is 1830mm, 1500mm, and 1750mm. Holes are drilled on both sides of the H postASTM Steel H Post picture . Specification of ASTM Steel H Post:Normal Sizes150*100*4.3*5.5*1830(mm)100*50*25*5*1500(mm)Other specifications can be customizedMaterailS235JR,S355JR Surfacce treatmentHot dipped galvanized or plastic sprayed coatingBase SteelGrade S235JR ( according to DIN EN 10025 and Gr.

C-post internal flange zigzag layout, sturdy tensile energy and bending capacity, can efficiently resist sliding, effect and shear, beautify the connection reliability of the complete systemDue to the fact it's miles product of hot rolled metal plate, has the benefit of mild weight, hot dip zinc surface treatment, anti-corrosion.It has top flexibility, scientific and reasonable internal shape, excessive stability.

H-beam post has the following advantages:1. High strength: The section shape of H-post is reasonable, able to withstand complex mechanical forces, with high strength.2. Good stability: The upper and lower flange pressure bar and the groove of the middle waist bar of the H-section steel column can make the stability of the structure better, and enhance the bending, torsion and extrusion resistance.3. Strong anti-corrosion: After hot dip galvanizing, H-beam post has good anti-corrosion and anti-oxidation effect to protect the long-term service life of steel structure.4.

C post inner flange zigzag format, robust tensile strength and bending ability, can efficiently withstand sliding, impact and shear, decorate the connection reliability of the whole deviceDue to the truth it's far crafted from heat rolled metal plate, has the gain of mild weight, hot dip zinc ground treatment, anti-corrosion.It has pinnacle flexibility, medical and affordable internal form, immoderate balance.

The packaging method of H post can be flexibly adjusted according to the specific situation, and the common packaging methods include the following:1. Film packaging: The H post is packed with transparent film to prevent slight damage and contamination. This packing method is suitable for indoor transportation or short distance handling.2. Pallet packaging: Place multiple HPosts neatly on the pallet and use steel tape or stretch film to fix them.

Steel H post has the following advantages:1. High strength: The section shape of H post is reasonable, able to withstand complex mechanical forces, with high strength.2. Good stability: The upper and lower flange pressure bar and the groove of the middle waist bar of the H-section steel column can make the stability of the structure better, and enhance the bending, torsion and extrusion resistance.3. Strong anti-corrosion: After hot dip galvanizing, H-beam post has good anti-corrosion and anti-oxidation effect to protect the long-term service life of steel structure.4.

The galvanizing process of FORST guardrail beam H post can usually be carried out using the following steps:1. Pretreatment: Clean the post surface to remove any dirt, oxides or grease. This can be achieved by methods such as solvent cleaning, sandblasting or pickling.2. Pickling: Soak the post in an acidic solution, such as hydrochloric acid, to remove any further oxides or scale. Pickling can provide a better bonding surface.3. Cleaning: Rinse the post with clean water to remove pickling residues.4. Ventilated and dry: Place the post in a ventilated area to allow it to dry thoroughly.5.

FORST guardrail beam H post has the advantages of high structural strength, easy installation, good corrosion resistance, diverse specifications and beautiful appearance, which can provide stable support and reliable protection for the guardrail system, and can also meet the needs of different environments and architectural styles.FORST guardrail beam H post parametersPlace of OriginShandong, ChinaBrand Name:FORSTProduct nameH PostMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification(Hot Rolled)150*100*4.3*5.

The general length of the ASTM Steel H post is 1830mm, 1500mm, and 1750mm. Holes are drilled on both sides of the H postASTM Steel H Post picture  Specification of ASTM Steel H Post:Normal Sizes150*100*4.3*5.5*1830(mm)100*50*25*5*1500(mm)Other specifications can be customizedMaterailS235JR,S355JR Surfacce treatmentHot dipped galvanized or plastic sprayed coatingBase SteelGrade S235JR ( according to DIN EN 10025 and Gr.

The storage of H-post should follow the following principles:1. In the storage process, try to avoid contact with harmful substances, such as paint, acid, alkali, etc.2. Remove oil and dust from the surface of the column and keep the surface clean.3. The storage site should be smooth and free of accumulation and weeds to avoid fouling of H-beam columns.4. H steel post should be kept away from direct contact with water or moisture during storage.

C-post inner flange zigzag design, strong tensile strength and bending ability, can effectively resist sliding, impact and shear, enhance the connection reliability of the whole systemBecause it is made of hot rolled steel plate, has the advantage of light weight, hot dip zinc surface treatment, anti-corrosion.It has good flexibility, scientific and reasonable internal structure, high stability.