High Intensity-manufacture,factory,supplier from China

Power configuration: Diesel water-cooled engineMixing system: vertical paddle mixerPower: 8hpHeating system: high-efficiency energy-saving burner/direct injection stoveStart mode: electric start / hand pull Heating method: liquefied gas heatingPacking size: 1730*1650*1190mm Coating capacity: 300kg*2Weight: 780kg Recommended discharge temperature: 180 degrees--220 degreesMelt temperature: 0--300 degreesProduct picture of 300kg single cylinder hot melt kettle：

The waveform guardrail buffer end has the following characteristics:1. Buffer design: The buffer end of the wave guardrail adopts special buffer material and structural design, which has good energy absorption capacity, and can absorb and disperse the impact force when the vehicle collides, thereby reducing the damage to the vehicle and driver.2. Strong and durable: The buffer end of the wave guardrail is usually made of high-strength steel or other durable materials, which have sufficient strength and durability to withstand the force of high-speed collisions and remain stable and intact.3.

The material of the column is usually steel, specifically ordinary carbon structural steel or high-strength structural steel. Common materials include Q235B, S235JR, Q355B, S355JR, SS400 and so on.Q235B is a commonly used carbon structural steel, its chemical composition mainly contains carbon (C), silicon (Si), manganese (Mn), sulfur (S), phosphorus (P) and other elements. It has good plasticity and weldability, and is widely used in architectural and structural engineering.Q345B is a high-strength structural steel with higher yield strength and tensile strength compared to Q235B.

The material structure of the guardrail beamSteel guardrail: Steel guardrail is the most common material and usually consists of cold-formed steel plates.Usually S235JR and S355JR materials, which have relatively high strength and rigidity, can provide bettercollision protection and safety performance.

TFORST provides high-quality guardrail beam products to the worldWhen the vehicle collides with it, the corrugated steel guardrail has good crashworthiness and energy absorption, so it is not easy to be crashed, and it also plays a good role in protecting the vehicle and the passengers.

Thermoplastic road marking machine is the key equipment used in thermoplastic road marking construction,it need to work together with thermoplastic preheater.  The marking shoe is made of high-precision cast iron,which can make the road line orderliness,uniform thickness and more beautiful. The grounded knife of marking shoe can adapt to different kinds of road.The glass beads dispenser can dispense glass beads automatically. The paint tank has double layer of stainless steel,which can keep warm and insulate against heat, it can help save energy and avoid form scalding

FORST guardrail beam is a special guardrail material produced by China FORST company, which has the following advantages:1. High strength2. Corrosion resistance3. Easy to install4. Abundant sizes and specifications5. Beautiful6.

FORST guardrail beams have the following characteristics:1. High strength: FORST guardrail beams are made of high-strength materials, which have excellent structural strength and durability, can withstand large pressure and impact, and ensure the stability and safety of the guardrail system.2. Precise manufacturing: FORST guardrail beam adopts advanced production equipment and technology, pays attention to details and precision control, ensures product quality and dimensional accuracy, and provides reliable guardrail system.3.

The working principle of the high-speed guardrail pile driver is actually very convenient and simple, the impact force of the pile driver will be injected into the stratum as the main driving force, the consumption of diesel as the power of the pile driver, the use of hydraulic sensing to drive the mechanical work, this construction method has more good efficiency, accurate quality of drilling, and the characteristics of small fuel consumption; For different environments and local geological conditions, we can choose different drill bits to punch in, which can better improve efficiencyHighway

C-post inner flange zigzag design, strong tensile strength and bending ability, can effectively resist sliding, impact and shear, enhance the connection reliability of the whole systemBecause it is made of hot rolled steel plate, has the advantage of light weight, hot dip zinc surface treatment, anti-corrosion.It has good flexibility, scientific and reasonable internal structure, high stability.

Steel H post has the following advantages:1. High strength: The section shape of H post is reasonable, able to withstand complex mechanical forces, with high strength.2. Good stability: The upper and lower flange pressure bar and the groove of the middle waist bar of the H-section steel column can make the stability of the structure better, and enhance the bending, torsion and extrusion resistance.3. Strong anti-corrosion: After hot dip galvanizing, H-beam post has good anti-corrosion and anti-oxidation effect to protect the long-term service life of steel structure.4.

H-beam post has the following advantages:1. High strength: The section shape of H-post is reasonable, able to withstand complex mechanical forces, with high strength.2. Good stability: The upper and lower flange pressure bar and the groove of the middle waist bar of the H-section steel column can make the stability of the structure better, and enhance the bending, torsion and extrusion resistance.3. Strong anti-corrosion: After hot dip galvanizing, H-beam post has good anti-corrosion and anti-oxidation effect to protect the long-term service life of steel structure.4.

FORST guardrail beam H post has the advantages of high structural strength, easy installation, good corrosion resistance, diverse specifications and beautiful appearance, which can provide stable support and reliable protection for the guardrail system, and can also meet the needs of different environments and architectural styles.FORST guardrail beam H post parametersPlace of OriginShandong, ChinaBrand Name:FORSTProduct nameH PostMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification(Hot Rolled)150*100*4.3*5.

The bending of the guardrail on the expressway will increase the aesthetics and the strength of the guardrail; It is formed by extrusion of automatic production line, with clean surface and strong corrosion resistance; Mature surface treatment; Anti-corrosion, anti-aging, sun resistance, high and low temperature resistance and other characteristics, the service life in outdoor environment can reach 10-25 years; The product is simple in structure, beautiful and practical, convenient for transportation and installation, good in anti-theft performance, and limited by the actual terrain.

The use rate of the post in Africa is very high, and many customers choose this type of post, which has low cost, simple process and convenient installation.Details of Road U Post：Place of OriginShandong, ChinaBrand Name:ForstProduct nameU PostMaterialS235JR S355JRProduct picture of Road U Post： Specification of Steel Guardrail U Post：Normal Sizes150*75*5*1830mm;178*76*6*1830Other specifications can be customizedMaterailS235JR,S355JR Surfacce treatmentHot dipped galvanized or plastic sprayed coatingBase SteelGrade S235JR ( according to DIN EN 10025 and Gr.

Quick Details of Fish Tail-B：The fishtail terminal is a fan type end which provides a shallow termination for a steel guardrail fences. It is flared away from the roadway to cushion the shock. The fishtail terminal is available for guardrail beams and is ideal for double rail and walkways.

Usual packaging of FORST guardrail beams:1. Prepare packing materials: isolation rope, iron packing belt2. Guardrail beams are stacked crosswise every 20 or 30 pieces, and isolation ropes are placed in the middle of each layer3. The purpose of the isolation rope is to avoid wear between the guardrail beams and to maintain ventilation between each package of guardrail beams4. Wrap up with iron straps5.

Highway Guardrail Pile Driver（Pile driver、Pile puller、driller）Parameter NameUnitParameterParameter NameUnitParameterEngine rated powerKwA 33KW,A 51KW  Engine BrandA China FAW XichaiA Weichai EngineMachine Size（In Working）mm3250×2000×3400    (Column height after folding2400）Impact Frequency of Hydraulic Hammer次/min500-900Piling HeightMeter2.7Hydraulic Hammer Working Flowml/r30-50Machine Weightkg3200Hydraulic Hammer Working PressureMpa12~16Hydraulic System Working PressureMPa16Air FlowM3/min8Hydraulic System Flowml/r50Working Air PressureMPa0.5-1Drilling DiametermmØ

Quick Details of Terminal End：Place of OriginShandong, ChinaBrand Name:ForstProduct nameFish TailMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeatureImpact and corrosion resistantCertificateISO9001,AASHTO M180Specification725*310*2.75(mm)Application:Installed at the rear of the guardrail beamColorsilver whiteMOQ:100pcsPackaging DetailsBundledShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduct picture of Terminal End：Specification of Terminal End：Normal Sizes725*310*2.75(mm)Other specifications can be customizedMaterailS235JR,S355JR Surfacce treatmen

The principles of bridge guardrail design mainly include the following aspects1. Strength and stability: Bridge guardrails need to have sufficient strength and stability to withstand the impact of vehicles and the pressure of pedestrians. Generally speaking, the material selection of the guardrail should take into account its durability and corrosion resistance, such as using strong and durable materials such as steel or cast iron.2. Fall protection: The primary function of bridge guardrails is to prevent vehicles and pedestrians from accidentally falling onto bridges.

Fixed on the avenue surface, used to information the proper route to drive, forestall rushing and visitors accidents1. Highway2. City Road3. Cross and facet walks4. Airport5. Bike and pedestrian lanes6.

Quick Details of ISO1461 Standard Highway GuardrailPlace of OriginShandong, ChinaBrand Name:forstProduct nameHaghway Guardrail W BeamMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeature:Impact and corrosion resistantCertificate:ISO9001,AASHTO M180Thickness:2.5mm-4.0mmApplication:Roadway SafetyLength4130mm,4320mmKeyword:Traffic Road Steel BarrierColor:silver whiteMOQ:100pcsPackaging Details20 pieces a packShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduction flow chart of ISO1461 Standard Highway GuardrailProduct parameter of ISO

Quick Details of Galvanized W BeamPlace of OriginShandong, ChinaBrand Name:FORSTProduct nameHaghway Guardrail W BeamMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeature:Impact and corrosion resistantCertificate:ISO9001,AASHTO M180Thickness:2.5mm-4.0mmApplication:Roadway SafetyLength2320-4320mmKeyword:Traffic Road Steel BarrierColor:silver whiteMOQ:100pcsPackaging Details20 pieces a packShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduction flow chart of Galvanized W BeamProduct parameter of Galvanized W BeamNormal SizesLength(mm)

Quick Details of road guard railsPlace of OriginShandong, ChinaBrand Name:FORSTProduct nameHaghway Guardrail W BeamMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeature:Impact and corrosion resistantCertificate:ISO9001,AASHTO M180Thickness:2.5mm-4.0mmApplication:Roadway SafetyLength2320-4320mmKeyword:Traffic Road Steel BarrierColor:silver whiteMOQ:100pcsPackaging Details20 pieces a packShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduction flow chart of road guard railsProduct parameter of road guard railsNormal SizesLength(mm):20