Hot dip galvanized bridge guardrail-manufacture,factory,supplier from China

(Total 24 Products for Hot dip galvanized bridge guardrail)
FORST hot-dip galvanized bridge guardrail has the following advantages:Galvanized layer protection: During the hot-dip galvanizing process, iron or steel is immersed in the galvanizing solution to form a strong galvanized layer, which can effectively prevent the corrosion of iron or steel and prolong the service life.Strong Durability: The galvanized layer provides additional protection, making the guardrail highly durable and corrosion-resistant, capable of long-term use in harsh climate conditions.Low maintenance cost: The hot-dip galvanized guardrail requires almost no maintenance and does
  Contact Now
The principles of bridge guardrail design mainly include the following aspects1. Strength and stability: Bridge guardrails need to have sufficient strength and stability to withstand the impact of vehicles and the pressure of pedestrians. Generally speaking, the material selection of the guardrail should take into account its durability and corrosion resistance, such as using strong and durable materials such as steel or cast iron.2. Fall protection: The primary function of bridge guardrails is to prevent vehicles and pedestrians from accidentally falling onto bridges.
  Contact Now
Quick Details of Hot melt kettleModel:SW-4A-1200 Size:1800*1700*1580mm Weight:1020kgs  Tank Quantity:Double Tanks Capacity of Tank:600kgs*2 Hydraulic Oil Tank:70L Material Temperature:180-220℃ Rotational System:20-100r/min Working Pressure:4-5 mpa Diesel Engine:15P Electric started water coolingProduct picture of Hot melt kettle: 
  Contact Now
C-post internal flange zigzag layout, sturdy tensile energy and bending capacity, can efficiently resist sliding, effect and shear, beautify the connection reliability of the complete systemDue to the fact it's miles product of hot rolled metal plate, has the benefit of mild weight, hot dip zinc surface treatment, anti-corrosion.It has top flexibility, scientific and reasonable internal shape, excessive stability.
  Contact Now
Power configuration: Diesel water-cooled engineMixing system: vertical paddle mixerPower: 8hpHeating system: high-efficiency energy-saving burner/direct injection stoveStart mode: electric start / hand pull Heating method: liquefied gas heatingPacking size: 1730*1650*1190mm Coating capacity: 300kg*2Weight: 780kg Recommended discharge temperature: 180 degrees--220 degreesMelt temperature: 0--300 degreesProduct picture of 300kg single cylinder hot melt kettle:
  Contact Now
FORST hot-dip galvanized iron guardrail beams have the following advantages:1. Durability: Hot-dip galvanizing treatment can make iron guardrail beams extremely durable, making it able to resist corrosion, oxidation and other environmental damage for a long time.2. Anti-corrosion: Hot-dip galvanizing can effectively prevent iron guardrail beams from corrosion and rust, prolonging its service life.3.
  Contact Now
C-post inner flange zigzag design, strong tensile strength and bending ability, can effectively resist sliding, impact and shear, enhance the connection reliability of the whole systemBecause it is made of hot rolled steel plate, has the advantage of light weight, hot dip zinc surface treatment, anti-corrosion.It has good flexibility, scientific and reasonable internal structure, high stability.
  Contact Now
The method of installing C-shaped columns is as follows:1. Preparation: Confirm the installation position and quantity, and measure the appropriate size. Prepare required tools and materials, such as electric drills, screwdrivers, screws, nuts, and wrenches.2. Install support: Secure the column support to the ground or wall, and secure the support using screws and nuts. Ensure the position and levelness of the support.3.
  Contact Now
U post is a kind of steel with a flow phase just like the english letter "u".
  Contact Now
H-post is a brand new form of monetary constructing steel. the segment form of h beam is finances pleasant and reasonable, and the mechanical houses are genuine. at the same time as rolling, every factor on the phase extends greater lightly and the internal stress is small. in evaluation with ordinary i-beam, it has the advantages of big phase modulus, mild weight and metallic saving.
  Contact Now
Hot-dip galvanizing can improve the anti-corrosion property of H-beam column, so that it can be widely used in the area with serious environmental pollution or humidity.
  Contact Now
H-post is a new type of economic building steel. The section shape of H beam is economical and reasonable, and the mechanical properties are good. When rolling, each point on the section extends more evenly and the internal stress is small. Compared with ordinary I-beam, it has the advantages of large section modulus, light weight and metal saving.
  Contact Now
Quick Details of Galvanized W BeamPlace of OriginShandong, ChinaBrand Name:FORSTProduct nameHaghway Guardrail W BeamMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeature:Impact and corrosion resistantCertificate:ISO9001,AASHTO M180Thickness:2.5mm-4.0mmApplication:Roadway SafetyLength2320-4320mmKeyword:Traffic Road Steel BarrierColor:silver whiteMOQ:100pcsPackaging Details20 pieces a packShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduction flow chart of Galvanized W BeamProduct parameter of Galvanized W BeamNormal SizesLength(mm)
  Contact Now
Guardrail zinc layer treatment methods usually include the following:1. Hot dip galvanizing: the guardrail components are first de-oiled and de-rusted, and then immersed in the molten zinc liquid to form a uniform and dense zinc layer on the surface of the components through a chemical reaction.2. Electric galvanizing: The guardrail parts are galvanized by electrolysis, that is, zinc sheets are placed on the surface of the parts as an anode, and zinc ions are deposited on the surface of the parts to form a zinc layer through the action of current.3.
  Contact Now
Quick Details of Galvanized Steel W BeamPlace of OriginShandong, ChinaBrand Name:FORSTProduct nameHaghway Guardrail W BeamMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeature:Impact and corrosion resistantCertificate:ISO9001,AASHTO M180Thickness:2.5mm-4.0mmApplication:Roadway SafetyLength4130mm,4320mmKeyword:Traffic Road Steel BarrierColor:silver whiteMOQ:100pcsPackaging Details20 pieces a packShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduction flow chart of Galvanized Steel W BeamProduct parameter of Galvanized Steel W BeamNo
  Contact Now
H post production material is generally low carbon steel or low alloy steel. Commonly used Q235B, Q355B, SS400 and other materials. These materials have good mechanical properties and cost-effective, widely used in construction, bridge, steel structure and other fields. In processing and manufacturing, it is also necessary to carry out hot rolling, cold rolling or hot galvanizing and other treatments to improve its strength, corrosion resistance and beauty.
  Contact Now
Quick Details of Galvanized U PostPlace of OriginShandong, ChinaBrand Name:FORSTProduct nameU PostMaterialS235JR S355JRSurface treatmentHot Dipped GalvanizedFeature:Impact and corrosion resistantCertificate:ISO9001,AASHTO M180Thickness:2.5mm-4.0mmApplication:Roadway SafetyLength4130mm,4320mmKeyword:Traffic Road Steel BarrierColor:silver whiteMOQ:100pcsPackaging Details20 pieces a packShipping portQingdao Tianjin or otherSupply Ability15000 Ton/ per YearProduction flow chart of Galvanized U Post Product parameter of Galvanized U PostNormal Sizes150*75*5*1830(mm)178
  Contact Now
C post inner flange zigzag format, robust tensile strength and bending ability, can efficiently withstand sliding, impact and shear, decorate the connection reliability of the whole deviceDue to the truth it's far crafted from heat rolled metal plate, has the gain of mild weight, hot dip zinc ground treatment, anti-corrosion.It has pinnacle flexibility, medical and affordable internal form, immoderate balance.
  Contact Now
C post inner flange zigzag format, robust tensile strength and bending capacity, can successfully face up to sliding, impact and shear, beautify the connection reliability of the complete gadgetBecause of the reality it's miles made from warm rolled metal plate, has the advantage of mild weight, hot dip zinc floor treatment, anti-corrosion.It has pinnacle flexibility, scientific and reasonable internal form, immoderate balance.
  Contact Now
Common specifications of FORST guardrail beam H post:1. Material: generally hot-dip galvanized steel, the material is S235JR or S355JR.2. Height: usually 1.5 meters, 1.83 meters or 2.1 meters, other heights can also be customized according to requirements.3. Section shape: H-shaped beam shape, the upper beam is a horizontal H-shaped section, and the lower column is a vertical H-shaped section.4. Wall thickness: usually 3-5mm, the specific thickness will vary according to design requirements and application fields.5.
  Contact Now
FORST guardrail beam hot-dip galvanizing is a commonly used anti-corrosion process,1. Preparatory work: Clean and surface-treat the guardrail to remove oil, rust and other impurities on the surface to ensure the adhesion of the coating.2. Pickling: immerse the guardrail in an acidic solution such as hydrochloric acid or sulfuric acid for pickling. Pickling can remove oxides and rust on the surface and improve the adhesion of the coating.3. Pretreatment: The pickled guardrail is subjected to wet coating pretreatment.
  Contact Now
C post inner flange zigzag layout, robust tensile strength and bending potential, can efficiently withstand sliding, effect and shear, decorate the connection reliability of the complete gadgetDue to the reality it's miles made from warm rolled steel plate, has the gain of slight weight, hot dip zinc floor treatment, anti-corrosion.It has pinnacle flexibility, medical and reasonable internal form, excessive balance.
  Contact Now
Advantages of FORST guardrail beams:1. Safety performance: Guardrail beams are usually used in fences and safety protection systems, which can provide effective physical isolation and protection. Its solid structure and height can prevent people or vehicles from accidentally passing through, ensuring safety.2. Durability: Guardrail beams are generally treated with hot-dip galvanizing or other anti-corrosion processes, which can effectively prevent rust and corrosion. The guardrail has a long service life, can withstand the test of various harsh environments, and is not easy to be damaged.3.
  Contact Now
Guardrail Beam C Posts Specifications:Normal Sizes1830*120*62.5*25   Thickness :4-6mmDifferent sizes can be customized.Raw Material Q235B/Q355B (equivalent to S235JR/S355JR)Surface TreatmentHot dipped galvanized or powder/plastic sprayed coatingThe Thickness of Galvanized(Double Sides):550 g/m2 (1.80 oz/ft2 ) minimum single-spot.1100 g/m2 (3.60 oz/ft2 ) minimum single-spot.Or as per your 
  Contact Now
Relate News
The corrosion resistance mechanism of the hot-dip galvanized W beam layer of the corrugated guardrail board, and the hot-dip galvanized layer of the base material of the corrugated guardrail board have three major functions.(1) Isolation and protection.Although zinc is highly reactive to metals, corrosion develops slowly in the atmosphereand in near-neutral water.
Structurally, highway guardrail is usually made of steel plates that have been stamped and then hot-dip galvanized or sprayed with plastic. The highway guardrail treated in this way not only has excellent anti-corrosion performance and can be used for a long time in harsh environments such as outdoor, low temperature, and acid rain, but also has a smooth and bright surface, with excellent aesthetics.
Firstly, the material of the guardrail beam has a significant impact on its lifespan. For example, hot-dip galvanized national standard guardrails have a relatively long lifespan due to their good anti-corrosion performance. In addition, the surface treatment method, anti-corrosion performance and anti-aging performance of the fence will also affect its service life.
The main surface treatment methods for guardrail beam include hot-dip galvanizing and spray painting.Hot dip galvanizing is a common surface treatment method for guardrail beam.
1. The guardrail beam is made of low-carbon steel, which has good elasticity and strong collision absorption ability. After surface rust removal, acid washing and other chemical processes, hot-dip galvanizing is carried out to improve the aesthetic effect of anti-corrosion design. Except for the splice bolt M16-35 which is made of 45 steel, the rest are made of Q235.2. The appearance of the guardrail beam is smooth, with a smooth surface, bright colors, and elegant appearance.
During the construction process of highway guardrail, it is important to accurately grasp various facilities. Firstly, the accurate positions of various pipelines buried in the roadbed should be ensured that they do not cause any damage to underground facilities during the work process.2. Column layout: Column layout shall be carried out according to the design drawings, and distance measurement system positioning shall be carried out using highway guardrail as control points for a bridge, passage, culvert, divider opening, overpass, level crossing, etc.3.
1. Guardrail beam: This is the main component of guardrail beam, usually made of hot-rolled steel. Its specifications are usually 220 * 150 * 100, and there are also some special specifications of guardrail beam.2. Column: Column is the supporting structure of guardrail beam, usually made of hot-rolled steel. Its specifications are usually 250 * 120 * 100, and there are also some special specifications of columns.3. Cross beam: A cross beam is the transverse support structure of a guardrail beam, usually made of hot-rolled steel.
This is the fourth order for guardrail beams purchased by Mr. Muhammad from FORST this year, and the project is located in the central road of Qatar. AASHTO M180 guardrail beam, Class A TYPEⅠ. Specification 4130*310*83*2.75 hot-dip galvanized 550g/㎡, with H post specification W6*9*1830 and H block specification W6*9*350.FORST has 15 years of experience in the production and sales of guardrail beams. Our experience will help road safety construction around the world.
The highway guardrail board is the foundation for ensuring the overall size and appearance quality of the anti-collision guardrail. From the beginning of template production, high standards and strict requirements must be met. In the past, anti-collision guardrail templates were generally made of wooden formwork, wrapped with galvanized iron sheet or cold-rolled black iron sheet.
1. Surface roughness of galvanized steel: When iron zinc alloy is used excessively or unevenly distributed, it can develop and affect the roughness of the surface of the highway guardrail. There may be some white rust on the surface. Highway guardrail  with white rust can make people feel severely corroded. White powder is not zinc layer rust, only needs weak acid treatment and cleaning.2.