highway H POST
Classification: Guardrail H Post
Brand Name: FORST
Brief Introduction:
Steel Guardrail Beam H Post Specifications:
Normal Sizes 1830*150*100*4-6mmThickness:4-6mm
Different sizes can be customized
Raw Material Q235B/Q355B
Quick Details of ASTM Steel H post
Place of Origin | Shandong, China | Brand Name: | Forst |
Product name | H Post | Material | S235JR S355JR |
Surface treatment | Hot Dipped Galvanized | Feature | Impact and corrosion resistant |
Certificate | ISO9001,AASHTO M180 | Specification | 150*100*4.3*5.5*1830(mm) 100*50*25*5*1500(mm) |
The general length of the ASTM Steel H Post is 1830mm, 1500mm, and 1750mm. Holes are drilled on both sides of the H post
. 
When installing H-type guardrail post (H post), the following matters need to be noted:
1. Determine the installation position: Before installing the H-type guardrail column, it is necessary to determine the layout and actual needs of the guardrail, and determine the distance between the guardrail line and the column.
2. Embedded foundation: Dig the foundation pit in line with the requirements of the code at the installation position, and strengthen the foundation pit according to the specific requirements, usually with concrete foundation embedment to ensure the stability and safety of the guardrail column.
3. Installation and positioning: Install the H-shaped guardrail column in the foundation pit, and use a level for horizontal positioning and calibration to ensure that all columns are on the same level.
4. Fixed column: Use bolts or welding to fix the H-shaped guardrail column on the ground to ensure the stability of the column.
5. Connecting the guardrail: The guardrail plate is connected with the H-type guardrail column, which is usually fixed by bolts and nuts.
6. Check and adjust: After the installation is complete, check all connection points to ensure that the fix is firm, the line is straight and not loose. If necessary, make necessary adjustments and corrections.
The above is the installation of H-type guardrail column general matters, the specific installation steps and requirements may vary according to different regions and products, before the installation, it is recommended to refer to the relevant installation instructions and specifications, to ensure that the installation is correct, stable and meet the safety requirements.
. 
